SANCON CONVEYOR & GENLITE GENERATOR
Description
Sancon MR35-7 Conveyor & Genlite Generator (Open to Offers) (sale-ehub4173)
Conveyor
Make: Sancon
Model: MR35-7
Year: 2014
Dimensions;
Length: 7 Metres Approx.
Width: 1.35 Metres
Height: 2.2 Metres
- 3-Phase Electric Reversible Belt Direction
Generator
Make: Genlite
Engine: Yanmar
- 3-Phase 4.5 kVA (415 & 240 Volt)
- Air Cooled
- It can be towed around site with a vehicle
- It can be adjusted up or down to convey to differing heights
- The Diesel Generator can be re-levelled by a screw adjuster
- Conveyor’s belt direction can be easily changed by a switch
- There are convenient single-phase outlets mounted on the conveyor
- The generator is electric or pull start
- It was set up to be mine compliant, with Emergency Stop, Battery Isolator, and other safety features
- Brand New 14” Inch Tyres on Sunraiser wheels
A bobcat fed hopper was used to place sand onto the conveyor which was then conveyed to our mixers. Cement and water was added at the mixer in controlled proportions. Mix was dumped into another hopper or a grout / mortar pump as required. This provided continuous outputs. The conveyor could be used for agriculture, or conveying any suitable product.
Conveyor & Generator
Location: Queensland, AustraliaSpecifications
CategoryOther
ManufacturerSANCON CONVEYOR &
ModelGENLITE GENERATOR
Serial NumberXXXX
ConditionUsed
Stock Numbersale-ehub4173
CategoryOther|
ManufacturerSANCON CONVEYOR &|
ModelGENLITE GENERATOR|
Serial NumberXXXX|
ConditionUsed|
Stock Numbersale-ehub4173|
